Nuprodx Mobility Accessories Tub & Commode Chair Portable With Carrying Case

Nuprodx Mobility Accessories Tub & Commode Chair Portable With Carrying Case

Disclaimer

These products are made to order. Please contact us before placing your order so we can advise you on the production and delivery timelines specific to your purchase. Please refer to our Shipping Policy.

-----------------------------------------------------------------------------

Bathroom Dimension Sheet Instructions

Nuprodx bath/commode chairs and slider systems are designed to fit in tight spaces. Follow the descriptions below and enter measurements in ½-inch increments (e.g., 10.5 for 10 and one-half inches). For any questions, please call us.

Measurements:

• A: Overall length of bathtub
• B: Length of bathtub floor
  
• C: Width of bathtub floor (flat portion only)
  
• D: Overall width of bathtub
  
• E: Distance between edge of toilet bowl and bathtub
  
• F: Widest portion of toilet bowl (including “wedge” shape up to face of tank)
  
• G: Distance between edge of toilet bowl and closest object/wall
  
• H: Distance from front edge of toilet bowl to closest object/wall
• J: When the toilet is NOT next to the tub*: Distance from the center of the bathtub to the edge of the outside bathtub ledge
  
• K: Distance from center of toilet bowl to center of bathtub drain/spout
  
• L: Distance from top edge of bathtub to floor of bathtub
  
• M: Distance from top edge of bathtub to bathroom floor
  
• N: Distance from top of toilet bowl to bathroom floor (with seat and lid in raised position)
  
• - Width of the doorway**

For Showers, Include:

1. Height of the shower threshold on the OUTSIDE of the shower (top of threshold to bathroom floor)
2. Width of the shower entry (to verify unit will fit through entryway)
3. Height of the shower threshold on the INSIDE of the shower (top of threshold to shower floor)
4. Overall width of the shower (left to right)
5. Overall depth of the shower (front to back)

Please call us for further assistance—this is what we do best!

Enhance your Nuprodx mobility solutions with our range of high-quality accessories designed for increased comfort, safety, and convenience. Our accessories include:

• Chest Belt: Provides additional upper body support.
• Splash Guard: Keeps water contained and reduces mess during use.
• Tub-side Transfer Bench: Eases bath entry and ensures a smooth transfer experience.
• Supportive Calf Panel: Offers added leg support and comfort.
• Custom Cushions: Tailored to fit for optimal comfort and support.
• Shower Legs: Sturdy and adjustable for secure shower use.
• Commode Pan (Standard Mount): Easy-to-install standard commode pan.
• Optional Bridges: Extend the reach of your transfer system.
• Solid Seat Cushions Available: Extra durable and comfortable seating options.
• Floor Support Transfer Bench: Provides stable support for floor-level transfers.
• Commode Pan with Lowering Brackets: Allows for easier access and use.
• Side Hip Pads: Enhance lateral support and comfort.
• Optional Seat Belts: Extra security for safe and secure seating.
• Suction Cup Feet and Crutch Tip Feet Options: Ensure a secure grip on various surfaces.
• Arm Troughs: Provide comfortable arm support.
• Full Selection of Carrying Cases: Protect and transport your mobility equipment with ease.

Equip your Nuprodx mobility chair with these essential accessories to improve your daily living experience and ensure maximum comfort and safety.

Specifications

• A4: ARM PAD (2) 10” long gray naugahyde and black plastic base attaches to arm style A3 (upgrade)
• A5Daher-N:  ARM TROUGHS, (one pair) One-piece channel Forearm Pads (Daher 5015 Channel with Drain Hole)
• B: DROP RAIL for non sliding systems, allows 5" front or side access (specify left, right, front, back) (upgrade)
• B-4: DROP BAR for sliding systems, two clamps and 1 x 1 tubing which adjust vertically along the legs of a multiCHAIR (upgrade) TRANSFER 
• C2: TRANSFER CUSHION KIT, 8” wide, (upgrade)
• C3: SHOWER LEGS, (2) use with transfer cushion kit
• C4: TRANSFER CUSHION KIT, 12” wide (includes two full length legs) 
• D1: NG CASE - 18" x 18" x 6" (mc3000)
• D2Casters: D2Casters, 25" tall by 18" wide by 8.75" deep suitcase with pull-out handle and 4 swivel casters_
• D9: CARRYING CASE - 29" x 20" x 10" (with built-in trolly system)___
• D11: CARRYING CASE (20" diameter x 8" thick) to hold two 20" diameter wheels, including foam disc, pocket for axles, mounting straps
• D12: CARRYING CASE (24" diameter x 8" thick) to hold two 24" diameter wheels, including foam disc, pocket for axles, mounting straps
• E1: COMMODE PAN - 12" x 14" x 6" pan, u-channel rails, mounting hardware_
• E-1Tilt: COMMODE PAN, (1) 12" x 14" x 6" pan, u-channel rails, mounting hardware; Pan only accessible in the side-to-side direction 
• E-1XL: COMMODE PAN, (1) 12" x 14" x 6" pan, u-channel rails, mounting hardware, adapter brackets for the 20" x 20" frame 
• E-1TiltXL: COMMODE PAN, (1) 12" x 14" x 6" pan, u-channel rails, mounting hardware; adapter brackets for the 20" x 20" frame 
• E2: COMMODE PAN 4” LOWERING BRACKETS - (4) use with commode pan E1, E-1Tilt, E-1XL
• F3: HANDRIMS WITH PROJECTIONS, (2) coated handrims w/projections (standard 8 x 15 degree)
• Frame17x20: 17" WIDE X 20" DEEP frame and cushion upgrade
• Frame20x17: 20" WIDE x 17" DEEP frame and cushion upgrade
• G1: SIDE SUCTION CUP, (2) clamps onto the outside of the legs and vertical face of tub or wall
• G2: SUCTION CUP (4) each - threaded insert with suction cup attached to end of the inner leg (upgrade for a complete chair)
• G3: SUCTION CUP/CRUTCH TIP COMBO, (1) suction cup / (1) crutch tip & threaded inserts on (4) inner legs (upgrade for a complete chair)
• H4: 2" THICK SOLID CUSHION, (no commode opening) (upgrade)
• H10: CUSTOM CUSHION (most profiles and thickness) (upgrade to a chair or slider order)
• H10-Gel: CUSTOM CUSHION Custom cushion designed and fabricated with gel as an upgrade to a chair or slider order.)
• H18: SPLASH GUARD / ABDUCTOR (1) (4" thick x 4" wide x 6" tall), attached to front of seat frame_
• H19: LATERALS (2) L & R quick-release swing away, installs on single-bend back posts, pad size (1/2" thick x 5" long x 3-1/2" high)
• H23-New: SIDE MOUNTED HIP GUIDES, (2) stainless steel brackets, (2) 5"x7" pads
• J1: POSITIONING BELT, (1) chest, 2" wide, d-ring, hook + loop closure - Length (48")
• J1-BPM: BODYPOINT POSITIONING BELT MEDIUM, chest, 4" wide, Length (21-1/4" - 31")
• J1-BPL: BODYPOINT POSITIONING BELT LARGE, chest, 4" wide, Length (27-1/2" - 37-1/2")
• J2:  CALF STRAP, 2" wide, hook + loop closure
• J2BPM: BODYPOINT CALF PANEL, full height padded calf panel
• J3-N: HEEL STRAPS, (2) 2" wide, with mounting hardware
• J4: POSITIONING BELT, (1) seat, 2" wide, d-ring, hook + loop closure - Length (48")
• J4-BPM: BODYPOINT positioning belt medium - Seat, 4" wide, Length (21-1/4"-31")
• J4-BPL: BODYPOINT positioning belt large- Seat, 4" wide, Length (27-1/2" - 37-1/2")
• J8BPHarness-N: BODYPOINT CHEST HARNESS (Select size based from shoulder width: [XS: 9.5"-11"], [S: 11"-13′′], [M: 13"-16"], [L: 16"-19"], [XL: 19"-22"])
• L: ADJUSTABLE PADDED HEADREST ASSEMBLY
• L3-N: HEADREST MOUNT ASSEMBLY FOR COTH BACK, Push handles with machined clamp assembly receives vertical headrest tube
• L3-U: HEADREST MOUNT ASSEMBLY FOR COTH BACK (upgrade), Push handles with clamp assembly receives vertical headrest tube
• M: ADJUSTABLE SWING-AWAY FOOTREST - complete assembly (clamp, tubing, plastic foot paddle).
• M-1: FOOTREST PADDLE (1) left & one right assembly MINUS CLAMPS
• M-2: FOOTREST CLAMPS (1) aluminum clamp and hardware ONLY
• M-5: (2) FOOT/ANKLE STRAPS for use in shower environment (mounted with stainless steel fasteners)
• N: CONNECTOR BRIDGE, (1) custom length locking connector bridge 9" (non-lock), 10" to 23" locking (upgrade)
• P-7: BACK POST EXTENDERS (2) raised the height 4"
• P-9: CLOTH BACKREST ASSEMBLY (2) triple bend backrest posts, adjustable cloth back w/ two windows/three adjust buckle straps
• P9S-U: CLOTH BACKREST ASSEMBLY (upgrade) Adjustable cloth back, (2) triple bend backrest posts. Upgrade for sliding units
• P-28: Pair of Seat Depth Adapters (2-Hole), increases "effective" seat depth on Sliders and Tilt-in-Space systems by 1.5"

Pediatric Size Specification Options

• Pediatric Size Specification Options

User Dimension Guide

• User Dimension Guide

Bathroom Dimension Sheet

• Bathroom Dimension Sheet

Owner's Manual & Warranty

• Owner's Manual & Warranty